BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Motion + Power Manufacturers Alliance™ - ECPv6.16.4//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-WR-CALNAME:Motion + Power Manufacturers Alliance™
X-ORIGINAL-URL:https://motionpower.org
X-WR-CALDESC:Events for Motion + Power Manufacturers Alliance™
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/New_York
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20250309T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20251102T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20260308T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20261101T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20270314T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20271107T060000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260609T080000
DTEND;TZID=America/New_York:20260611T170000
DTSTAMP:20260726T120914
CREATED:20240930T152126Z
LAST-MODIFIED:20260527T134745Z
UID:3608-1780992000-1781197200@motionpower.org
SUMMARY:Gear Failure Analysis
DESCRIPTION:Course Description\n\n\n\nFormat: In-person Course \n\n\n\nWhere: Detroit\, MI – LIFT \n\n\n\nDate: June 9-11\, 2026 \n\n\n\n\nTuesday\, June 9 – 8:00am-5:00pm ET\n\n\n\nWednesday\, June 10 – 8:00am-5:00pm ET\n\n\n\nThursday\, June 11 – 8:00am-3:00pm ET\n\n\n\n\nGear Failure Analysis\n\n\n\nExplore gear failure analysis in this hands-on seminar where students not only see slides of failed gears but can hold and examine over 130 specimens with the same failure modes covered in the seminar. Approximately half of the course time consists of students in groups identifying failure modes on failed gears and working on a case study. Microscopes are available to examine failed specimens. \n\n\n\nYou will earn 24 clock hours upon completion of the course and they will be listed on your certificate of completion.\n\n\n\nLIFT Disclaimer\n\n\n\nPlease note that this class will be held at the LIFT Facility in Detroit\, Michigan\, therefore we are subject to specific access and security regulations. As a result\, attendance is limited to citizens of approved countries as determined by LIFT’s security policies. The approved country list as of November 2025 is as follows: Albania\, Belgium\, Bulgaria\, Canada\, Croatia\, Czech Republic\, Denmark\, Estonia\, Finland\, France\, Germany\, Greece\, Hungary\, Iceland\, Italy\, Latvia\, Lithuania\, Luxembourg\, Montenegro\, Netherlands\, North Macedonia\, Norway\, Poland\, Portugal\, Romania\, Slovakia\, Slovenia\, Spain\, Sweden\, Turkey\, United Kingdom\, United States\, and Australia. \n\n\n\nIndividuals who are citizens of countries not included on the facility’s approved list will unfortunately not be permitted to attend this session. Participants will be required to provide citizenship information during registration to confirm eligibility for entry. We appreciate your understanding and cooperation with these requirements\, which are in place to ensure compliance with facility and government regulations. \n\n\n\nLearning Objectives\n\n\n\n\nIdentify the primary and secondary failure modes\n\n\n\nUse the proper nomenclature to describe the morphology of gear failure\n\n\n\nUnderstand common tools and methods used in gear failure analysis\n\n\n\nDiagnose the root causes of failure\n\n\n\nPrescribe remedies to prevent repeat failures\n\n\n\nUse the GEARTECH textbook and other provided resources for ongoing study of gear failure analysis\n\n\n\nTailor failure analysis techniques for their specific requirements\n\n\n\n\nWho Should Attend\n\n\n\nSuitable for gear engineers\, users\, researchers\, maintenance technicians\, lubricant experts\, and managers. \n\n\n\n\n\n\n\nRegister now\n\n\n\nCourse outline (PDF)\n\n\n\n\nRegistration Rates\n\n\n\nMember Rates\n\n\n\nEarly Bird First Registrant – $2\,150(Deadline until 3/26/26) \n\n\n\nRegular First Registrant – $2\,250(Deadline: 3/27/26 – 5/12/26) \n\n\n\nLate First Registrant – $2\,300(Deadline: 5/13/26 – 5/26/26) \n\n\n\nAdditional Registrants per Company Member receive a $200 discount per person \n\n\n\n\nNON-MEMBER RATE\n\n\n\nEarly Bird First Registrant – $2\,650(Deadline until 3/26/26) \n\n\n\nRegular First Registrant – $2\,750(Deadline: 3/27/26 – 5/12/26) \n\n\n\nLate First Registrant – $2\,800(Deadline: 5/13/26 – 5/26/26) \n\n\n\nAdditional Registrants per Company Non-Member receive a $200 discount per person \n\n\n\n\n\n\n\nLocation\n\n\n\nThis course is taught at LIFT at 1400 Rosa Parks Blvd\, Detroit\, MI 48216. \n\n\n\n\n\n\n\n\n\nHotel Information\n\n\n\nDiscounted room rates at the Courtyard by Marriott Detroit Downtown are available for $199 per night. The special rate is available until May 18.  Book Your Room in the MPMA block. \n\n\n\nCourtyard by Marriott Detroit Downtown333 E Jefferson Ave\, Detroit\, MI 48226 \n\n\n\nCutoff Date: May 18\, 2026 \n\n\n\n\nBook Hotel Room\n\n\n\n\nBy booking in the MPMA room block\, you receive a variety of benefits\, including guaranteed accommodations\, better networking opportunities with your peers\, special guest status at the host hotel\, and flexible cancellation terms if your plans change. MPMA advises against booking hotel rooms through third party booking sites such as Hotels.com\, as there may be hidden fees\, limited flexibility\, and fewer rewards. MPMA does not work with a housing company and only MPMA Staff will reach out to you with details regarding the room block; any other companies that reach out to you regarding room reservations may be fraudulent and are not endorsed by MPMA. If you need assistance with your accommodations or have issues with the booking link provided by MPMA\, please contact events@motionpower.org.   \n\n\n\nInstructors\n\n\n\n\nTERRY KLAVES\n\nTerry Klaves semi-retired from the Milwaukee Gear Division of Regal Beloit in 2017 after 45 years of work in the gearing industry with four different companies\, positions varying from gear engineer to VP of Engineering and responsibilities including gear design\, optimization\, manufacturing and Quality Assurance.  He has a passion for solving gearing related problems and continues to serve the gearing industry as part time consultant and trainer for AGMA\, in addition\, he is Chairman of the AGMA TC-60 Committee\, contributing to development of ISO gearing standards.  Terry graduated with a BS-Engineering in 1976 and a MS-Engineering from UW-Milwaukee in 1981 and enjoys sharing his knowledge and passion for gears through formal consulting and training activities. \n\n\n\n\n\nLance Brown\n\nLance’s career started in 1992 as a mill and lathe machinist. His introduction to world of gearing began in 1997 with CGI\, Inc in Carson City\, Nevada. As the lead gear designer\, he contributed many geared solutions to the medical (orthopedic and surgical robotics)\, defense\, commercial/consumer\, and robotics industries. He has collaborated with some of the world’s brightest minds and most talented engineers and designers to bring powerful solutions to life through advanced gear-train\, and assembly design. Lance sat on several of AGMA’s (MPMA) technical committees and was a member of the Technical Division Executive Committee (TDEC). Lance’s role with MPMA as Senior Technical Instructor began on October 1st\, 2025. \n\n\n\n\n\n\n\n\nPhoto Release\n\n\n\nFrom time to time MPMA uses photographs\, survey answers and testimonial of MPMA events in its promotional materials. Unless this permission is revoked in writing to the MPMA\, by virtue of your attendance all attendees agree to the use of their likeness in such materials. \n\n\n\nCancellation and Payment Policy\n\n\n\nPlease view our cancellation policy. \n\n\n\nPlease view our late registration policy. \n\n\n\nPlease view our code of conduct.
URL:https://motionpower.org/event/gear-failure-analysis-june-2025/
CATEGORIES:Courses,In-Person Courses
ATTACH;FMTTYPE=image/png:https://motionpower.org/wp-content/uploads/2024/09/Screenshot-2026-04-01-103948.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260602T140000
DTEND;TZID=America/New_York:20260604T120000
DTSTAMP:20260726T120914
CREATED:20260320T151236Z
LAST-MODIFIED:20260602T141041Z
UID:3296-1780408800-1780574400@motionpower.org
SUMMARY:2026 Strategic Networking & Leadership Forum
DESCRIPTION:The MPMA SNL Forum is a group that brings together MPMA members from across the gear industry. The goal of the SNL Forum is to provide a dynamic\, educational\, and collaborative event to help participants grow\, both within the industry and the association. The SNL Forum offers robust\, peer-focused networking opportunities to mid-level managers and next-generation executives in the gear industry\, giving attendees new tools to utilize in a rapidly changing industry and economy. The event features educational opportunities in business training\, thorough exposure to both leadership and technology resources\, and hands-on learning with workshops and industry tours. \n\n\n\n\n\n\n\n\n\nHotel Information
URL:https://motionpower.org/event/2026-strategic-networking-leadership-forum/
LOCATION:Embassy Suites by Hilton Indianapolis Downtown\, 110 W Washington St.\, Indianapolis\, IN\, 46204\, United States
CATEGORIES:Events
ATTACH;FMTTYPE=image/jpeg:https://motionpower.org/wp-content/uploads/2026/03/2026-SNL-Banners-FINAL_1000x1000.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260602T080000
DTEND;TZID=America/New_York:20260604T170000
DTSTAMP:20260726T120914
CREATED:20240930T151959Z
LAST-MODIFIED:20260420T161905Z
UID:3609-1780387200-1780592400@motionpower.org
SUMMARY:Fundamentals of Parallel Axis Gearing
DESCRIPTION:Course Description\n\n\n\nFormat: In-person Course \n\n\n\nWhere: Clearwater Beach\, FL \n\n\n\nDate: June 2-4\, 2026 \n\n\n\n\nTuesday\, June 2 – 8:00am-5:00pm ET\n\n\n\nWednesday\, June 3 – 8:00am-5:00pm ET\n\n\n\nThursday\, June 4 – 8:00am-5:00pm ET\n\n\n\n\nFundamentals of Parallel Axis Gearing\n\n\n\nGain a solid and fundamental understanding of gear geometry\, types and arrangements\, and basic design principles. Starting with the basic definitions of gears\, conjugate motion\, and the Laws of Gearing\, learn the tools needed to understand the inter-relation and coordinated motion operating within gear pairs and multi-gear trains. Basic gear system design process\, gear measurement and inspection techniques will also be explained.  \n\n\n\nIn addition\, the fundamentals of understanding the stepwise process of working through the iterative design process required to generate a gear pair will be reviewed. Learn the steps and issues involved in design refinement and some manufacturing considerations.  \n\n\n\nAn explanation of basic gear measurement techniques\, how measurement equipment and test machines implement these techniques\, and how to interpret the results from these basic measurements will also be covered. Finally\, a brief overview of in-service failure modes and causes. \n\n\n\nYou will earn 24 clock hours upon completion of the course and they will be listed on your certificate of completion.\n\n\n\nLearning Objectives\n\n\n\n\nDevelop a full appreciation for the meaning and correct use of gear nomenclature\n\n\n\nDescribe conjugacy and its relationship to transmission error\n\n\n\nAppreciate and correctly select the basic geartrain arrangements as a function of application\n\n\n\nBe able to describe and discuss the external factors that effect a gear pair and / or a geartrain\n\n\n\nDescribe how the applied torque manifests itself as a force on the surface of the tooth and further how this develops into stress within the body of the tooth\n\n\n\nBe able to describe and discuss the various common manufacturing techniques for gears\n\n\n\nDescribe the measurement and inspection techniques used to qualify a gear\n\n\n\nDevelop a high-level of appreciation for various gear failure modes and causes\n\n\n\n\nWho Should Attend\n\n\n\nThis course will appeal to anyone who is interested in gears\, gear systems\, design development or measurement and inspection techniques.  More specifically\, anyone responsible for the following will benefit; Mechanical power transmission system design\, development\, durability assessment and application; Application and development of geared systems technologies; Management of transmission designers and manufacturers; and supply of components and sub-systems to mechanical power transmission system manufacturers. \n\n\n\n\n\n\n\nRegister now\n\n\n\nCourse outline (PDF)\n\n\n\n\nRegistration Rates\n\n\n\nMember Rates\n\n\n\nEarly Bird First Registrant – $2\,150(Deadline until 3/19/26) \n\n\n\nRegular First Registrant – $2\,250(Deadline: 3/20/26 – 5/5/26) \n\n\n\nLate First Registrant – $2\,300(Deadline: 5/6/26 – 5/19/26) \n\n\n\nAdditional Registrants per Company Member receive a $200 discount per person \n\n\n\nNON-MEMBER RATE\n\n\n\nEarly Bird First Registrant – $2\,650(Deadline until 3/19/26) \n\n\n\nRegular First Registrant – $2\,750(Deadline: 3/20/26 – 5/5/26) \n\n\n\nLate First Registrant – $2\,800(Deadline: 5/6/26 – 5/19/26) \n\n\n\nAdditional Registrants per Company Non-Member receive a $200 discount per person \n\n\n\n\n\n\n\n\nLocation\n\n\n\n\n\n\n\nHotel Information\n\n\n\nSheraton Sand Key Resort1160 Gulf BlvdClearwater Beach\, FL 33767 \n\n\n\nYou can book your room at the discounted rate of $229 per night. The hotel cut-off date is May 11\, 2026. \n\n\n\n\n\nHotel Information\n\n\n\nBy booking in the MPMA room block\, you receive a variety of benefits\, including guaranteed accommodations\, better networking opportunities with your peers\, special guest status at the host hotel\, and flexible cancellation terms if your plans change. MPMA advises against booking hotel rooms through third party booking sites such as Hotels.com\, as there may be hidden fees\, limited flexibility\, and fewer rewards. MPMA does not work with a housing company and only MPMA Staff will reach out to you with details regarding the room block; any other companies that reach out to you regarding room reservations may be fraudulent and are not endorsed by MPMA. If you need assistance with your accommodations or have issues with the booking link provided by MPMA\, please contact events@motionpower.org. \n\n\n\n\n\n\n\nInstructors\n\n\n\n\nWilliam “Mark” McVea\, PhD\, P.E.\n\nDr. William Mark McVea\, P.E.\, is currently President and Principal Engineer of KBE+\, Inc. where he and his team design and develop complete powertrains for automotive and off-highway vehicles. His experience includes positions within the mechanical drive and powertrain industry. Chief Technology Officer for an industry leader in the design and development of patented powertrain engineering technology used primarily in the automotive industry; Professor of Vehicle Dynamics and Powertrain Sciences in the Mechanical Engineering Department at the Rochester Institute of Technology; adjunct professor at Purdue University in their Automotive Sciences Department; and was manager of the CAE group within a tier-one powertrain supplier to global automotive markets\, a consulting engineer in vehicle dynamics\, and a project manager of traction systems for off-highway vehicles as well. In addition\, he has extensive publication on transmission systems\, automated design assistant systems\, knowledge systems and knowledge-based engineering in general. He also holds or is listed as co-inventor on numerous patents related to mechanical power transmissions. Mark holds a B.S. in Mechanical Engineering from the Rochester Institute of Technology\, a PhD in Design Engineering from Purdue University and is a licensed Professional Engineer. \n\n\n\n\nPhoto Release\n\n\n\nFrom time to time MPMA uses photographs\, survey answers and testimonial of MPMA events in its promotional materials. Unless this permission is revoked in writing to the MPMA\, by virtue of your attendance all attendees agree to the use of their likeness in such materials. \n\n\n\nCancellation and Payment Policy\n\n\n\nPlease view our cancellation policy. \n\n\n\nPlease view our late registration policy. \n\n\n\nPlease view our code of conduct.
URL:https://motionpower.org/event/fundamentals-of-parallel-axis-gearing/
CATEGORIES:Courses,In-Person Courses
ATTACH;FMTTYPE=image/png:https://motionpower.org/wp-content/uploads/2024/09/Screenshot-2026-04-01-103712.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260514T100000
DTEND;TZID=America/New_York:20260514T120000
DTSTAMP:20260726T120914
CREATED:20260408T132441Z
LAST-MODIFIED:20260408T132441Z
UID:6063-1778752800-1778760000@motionpower.org
SUMMARY:Accuracy & Nomenclature Committee
DESCRIPTION:Subject:\n\n\n\nISO TAG activity\, project management \n\n\n\nLocation:\n\n\n\nVirtual
URL:https://motionpower.org/event/accuracy-nomenclature-committee/
CATEGORIES:Committee Meetings
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260513T100000
DTEND;TZID=America/New_York:20260513T120000
DTSTAMP:20260726T120914
CREATED:20260408T132321Z
LAST-MODIFIED:20260408T132322Z
UID:6061-1778666400-1778673600@motionpower.org
SUMMARY:AGMA 936 - Axx WG
DESCRIPTION:Subject:\n\n\n\nPM gear rating \n\n\n\nLocation:\n\n\n\nVirtual
URL:https://motionpower.org/event/agma-936-axx-wg/
CATEGORIES:Committee Meetings
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260512T100000
DTEND;TZID=America/New_York:20260513T140000
DTSTAMP:20260726T120914
CREATED:20240930T152238Z
LAST-MODIFIED:20260526T210555Z
UID:3610-1778580000-1778680800@motionpower.org
SUMMARY:A Practical Approach to Managing Gear Noise
DESCRIPTION:Course Description\n\n\n\nFormat: Live Online \n\n\n\n\n\nDaily Schedule: \n\n\n\n\nTuesday\, May 12 – 10:00am-2:00pm CT\n\n\n\nWednesday\, May 13 – 10:00am-2:00pm CT\n\n\n\n\nA Practical Approach to Managing Gear Noise\n\n\n\nA Practical Approach for Managing Gear Noise” combines theory with practical testing and simulation techniques used to manage gear noise.  Topics focus on insights into the mechanisms for both whine and rattle\, the two most common categories of gear “noise”.  The course presents clear explanations relating subjective evaluations of audible noise to objective actions\, including troubleshooting and countermeasures.  Concepts are supported with a number of sound and movie files.  Technical papers supporting certain concepts are cited for the students’ further study.   \n\n\n\nYou will earn 8 clock hours upon completion of the course and they will be listed on your certificate of completion.\n\n\n\nLearning Objectives\n\n\n\n\nExplanation of the underlying physics of gear noise generation mechanisms for whine and rattle\n\n\n\nExposure to vibration and sound instrumentation and testing techniques used to characterize whine and rattle\n\n\n\nIntroductions to advanced simulation tools for understanding the underlying physics of gear whine and rattle\, with insight into troubleshooting and countermeasures.\n\n\n\nDevelopment of a strategy for setting gearbox sound and vibration target levels\n\n\n\n\n\n\n\n\nBack in 2027\n\n\n\nCourse outline (PDF)\n\n\n\n\nRegistration Rates\n\n\n\nMember Rates\n\n\n\nEarly Bird Registrant – $600(Deadline until 2/28/26) \n\n\n\nRegular Registrant – $650(Deadline: 3/1/26 – 4/14/26) \n\n\n\nLate Registrant – $675(Deadline: 4/15/26 – 4/28/26) \n\n\n\nNON-MEMBER RATE\n\n\n\nEarly Bird Registrant – $700(Deadline until 2/28/26) \n\n\n\nRegular Registrant – $750(Deadline: 4/1/26 – 4/14/26) \n\n\n\nLate Registrant – $775(Deadline: 4/15/26 – 4/28/26) \n\n\n\n\n\n\nWho Should Attend\n\n\n\nThis course is intended for students\, technicians\, engineers\, and managers interested in or responsible for the management of gear noise in a variety of industries. \n\n\n\nInstructors\n\n\n\n\nRobert White\n\nBob White PhD\, PE is a Drivetrain NVH engineer with 37 years of experience.  For 31 of those years he worked at John Deere’s Product Engineering Center in drivetrain development\, touching nearly every transmission and axle produced by Deere. He specialized in making dynamic measurements and is especially known for his work in mitigating gear noise. He continues to do drivetrain problem solving through his company\, White Noise\, LLC. Bob is a member of the AGMA Sound & Vibration committee.  Contact him at RobertWhite@WhiteNoiseUSA.com. \n\n\n\n\nPhoto Release\n\n\n\nFrom time to time MPMA uses photographs\, survey answers and testimonial of MPMA events in its promotional materials. Unless this permission is revoked in writing to the MPMA\, by virtue of your attendance all attendees agree to the use of their likeness in such materials. \n\n\n\nCancellation and Payment Policy\n\n\n\nPlease view our cancellation policy. \n\n\n\nPlease view our late registration policy. \n\n\n\nPlease view our code of conduct.
URL:https://motionpower.org/event/gear-noise/
CATEGORIES:Courses,Live Online Courses
ATTACH;FMTTYPE=image/png:https://motionpower.org/wp-content/uploads/2024/09/Screenshot-2026-04-01-102936.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260512T100000
DTEND;TZID=America/New_York:20260512T120000
DTSTAMP:20260726T120914
CREATED:20260408T132216Z
LAST-MODIFIED:20260408T132454Z
UID:6059-1778580000-1778587200@motionpower.org
SUMMARY:AGMA 951 - Axx WG
DESCRIPTION:Subject:\n\n\n\nGear surface texture measurement \n\n\n\nLocation:\n\n\n\nVirtual
URL:https://motionpower.org/event/agma-951-axx-wg/
CATEGORIES:Committee Meetings
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260506T130000
DTEND;TZID=America/New_York:20260506T140000
DTSTAMP:20260726T120914
CREATED:20260417T205136Z
LAST-MODIFIED:20260420T165336Z
UID:6690-1778072400-1778076000@motionpower.org
SUMMARY:Leveraging AI Tools While Staying CMMC Compliant
DESCRIPTION:2026 ET Webinar Series\n\n\n\nDerrich Phillips | Lead CMMC Certified Assessor & Founder\, Aspire Cyber \n\n\n\nWith over 20 years of cybersecurity experience and roles at Lockheed Martin and Bank of America\, Derrich Phillips is one of the defense industry’s most trusted voices on CMMC compliance. As a Lead CMMC Certified Assessor and founder of the CMMC Professionals Network\, he has guided hundreds of manufacturers and defense contractors through the certification process. \n\n\n\nIn this webinar\, Derrich will cover critical 2026 deadlines — including mandatory third-party assessments launching November 2026 — common compliance gaps in manufacturing environments\, and how to responsibly leverage AI tools without jeopardizing your CMMC certification. Walk away with clear\, actionable steps to protect your DoD contracts and stay audit-ready. \n\n\n\n\nRegister\n\n\n\n\n\n\n\n\nDerrich Phillips\, LCCA\, CMMC PI\, CISSP\, CCSPPresident & Founder As a Lead CMMC Certified Assessor (CCA) and CMMC Provisional Instructor (PI)\, Derrich is on a mission to help organizations get CMMC certified fast without breaking the bank. He is dedicated to transforming complex CMMC compliance into practical\, actionable\, and affordable strategies for organizations.Derrich’s two decades in cybersecurity\, spanning roles as a Cyber Network Defender in the U.S. Army and leadership positions at Lockheed Martin\, Hewlett-Packard Enterprise\, and Bank of America\, have forged his unique approach. He understands the real-world challenges and applies that insight to simplify CMMC.As the Founder and President of Aspire Cyber\, Derrich ensures clients receive step-by-step guidance that minimizes burden and maximizes security.Derrich also established the CMMC Professionals Network (CPN)\, a 501(c)(3) nonprofit dedicated to delivering accessible\, hands-on CMMC training to all\, and hosts the CMMC Proof Podcast. Both initiatives are focused on providing actionable insights that make CMMC compliance more efficient and cost-effective.His goal is to give organizations the clarity and confidence to achieve CMMC certification swiftly\, allowing them to focus on growth\, not just compliance.
URL:https://motionpower.org/event/leveraging-ai-tools-while-staying-cmmc-compliant/
CATEGORIES:Upcoming Emerging Technology Webinars,Upcoming Webinars
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260506T100000
DTEND;TZID=America/New_York:20260506T120000
DTSTAMP:20260726T120914
CREATED:20260408T132053Z
LAST-MODIFIED:20260408T132053Z
UID:6057-1778061600-1778068800@motionpower.org
SUMMARY:Metallurgy & Materials Committee
DESCRIPTION:Subject:\n\n\n\nISO TAG activity\, project management \n\n\n\nLocation:\n\n\n\nVirtual
URL:https://motionpower.org/event/metallurgy-materials-committee/
CATEGORIES:Committee Meetings
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260505T100000
DTEND;TZID=America/New_York:20260505T120000
DTSTAMP:20260726T120914
CREATED:20260408T131922Z
LAST-MODIFIED:20260408T131922Z
UID:6053-1777975200-1777982400@motionpower.org
SUMMARY:AGMA 1010 - Gxx WG
DESCRIPTION:Subject:\n\n\n\nGear wear and failure \n\n\n\nLocation:\n\n\n\nVirtual
URL:https://motionpower.org/event/agma-1010-gxx-wg/
CATEGORIES:Committee Meetings
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260428T000000
DTEND;TZID=America/New_York:20260430T235959
DTSTAMP:20260726T120914
CREATED:20260330T164637Z
LAST-MODIFIED:20260330T165240Z
UID:5790-1777334400-1777593599@motionpower.org
SUMMARY:Technical Division Executive Committee
DESCRIPTION:Subject:\n\n\n\nStandards management\, FTM \n\n\n\nLocation:\n\n\n\nChicago\, IL
URL:https://motionpower.org/event/technical-division-executive-committee/
CATEGORIES:Committee Meetings
END:VEVENT
END:VCALENDAR