233: Bevel Gear Systems Design
Format: Live Online Training
Date: November 9-11 & 16-18, 2027
- Tuesday, November 9 – 12:00-4:00 pm ET
- Wednesday, November 10 – 12:00-4:00 pm ET
- Thursday, November 11 – 12:00-4:00 pm ET
- Tuesday, November 16 – 12:00-4:00 pm ET
- Wednesday, November 17 – 12:00-4:00 pm ET
- Thursday, November 18 – 12:00-4:00 pm ET
Intermediate Level – 233
Learn how to design and apply bevel gears systems from the initial concept through manufacturing and quality control and on to assembly, installation and maintenance. Engage in a practical hands-on guide to the bevel gear design, manufacture, quality control, assembly, installation rating, lubrication and, most especially, application.
This course is online. A webcam on your computer equipped with a microphone and speakers/headset are required for participation. Space is limited to 20-25 participants per course. Course materials will be mailed in hard copy. Please make sure to indicate your preferred mailing address in the registration process.
You will earn 18 clock hours upon completion of the course and they will be listed on your certificate of completion.
Learning Objectives
- Apply the selection process required to determine which type of bevel gear is best for a particular application
- Integrate both the manufacturing and quality control processes in the initial design process
- Draw upon how bevel gears are manufactured to design these gears FOR manufacturability and good quality control
- Discuss best practices for mounting, assembling and installing bevel gears
- Discuss requirements and practices for lubrication and maintenance
- Draw upon the relationship between standard rating practices and actual bevel gear tooth stresses as a means of optimum design
- Describe in-service lubrication and maintenance required to support long term operation
Who Should Attend
Engineers, technicians, and others involved in the selection, application and/or design of bevel gear systems.
Registration Rates
Member Rates
Early Bird Registrant – $1,950
(Deadline until 8/16/27)
Regular Registrant – $2,050
(Deadline: 8/17/27 – 10/12/27)
Late Registrant – $2,100
(Deadline: 10/13/27 – 10/26/27)
NON-MEMBER RATE
Early Bird Registrant – $2,450
(Deadline until 8/16/27)
Regular Registrant – $2,550
(Deadline: 8/17/27 – 10/12/27)
Late Registrant – $2,600
(Deadline: 10/13/27 – 10/26/27)
Instructors
Raymond J. Drago, P.E.
Raymond J. Drago is Chief Engineer of Drive Systems Technology, Inc. (DST), a mechanical power transmission consulting organization that he founded in 1976. Mr. Drago also worked for the Boeing Company – Helicopters Division until his retirement after 37 years of service. Currently Mr. Drago is involved in the analysis, design, manufacture, assembly, and testing of many gear systems. In his role with DST, Mr. Drago is active in all areas of mechanical power transmission, including the design and analysis of drive systems in a very diverse field of application from heart pumps to very large mining & mill gears. He has used his 58 years of gear technology experience to prepare and deliver more than 150 Technical Papers and 385 courses dealing with various aspects of gear design and analysis.
I started working at Boeing in 1967 and continued until my retirement in 2004. I started Drive Systems Technology in 1976 as a part time activity while still working at Boeing (with Boeing’s knowledge and approval, under strict guidelines) which eventually grew to the point where I retired early from Boeing in order to pursue DST as a full-time activity.
Photo Release
MPMA may use photographs, survey responses, and testimonials from its events in promotional materials. By attending an MPMA event, you agree to the use of your likeness in these materials. To revoke this permission, notify MPMA in writing.
Cancellation and Payment Policy
Please view our cancellation policy.
Please view our late registration policy.
Please view our code of conduct.